> ## Content Index
> Fetch the complete content index at: https://blog.tonalphoto.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# X2D II Firmware 1.4.15.7: Capture One Tethering, No Focus Distance Fix
- URL: https://blog.tonalphoto.com/x2d-ii-firmware-1-4-15-7/
- Published: 2026-11-18T15:54:34.000Z
- Updated: 2026-11-18T16:44:19.000Z
- Author: Konrad Michels
- Tags: Firmware, X2D II, #X2D II, #hasselblad, #Announcements, #Capture One

Hasselblad released firmware 1.4.15.7 for the X2D II 100C this morning, and Capture One released version 16.9.1 alongside it. Together they let the X2D II shoot tethered into Capture One over USB. My [firmware tracker](https://blog.tonalphoto.com/hasselblad-firmware-tracker/) picked the firmware up at 7:00 Eastern and emailed alert subscribers the same minute.

- **Direct download:** [X2DII\_100C\_v1\_4\_15\_7.cim](https://cdn.hasselblad.com/firmware/X2D%5FII%5F100C%5FFirmware/1.4.15.7/X2DII%5F100C%5Fv1%5F4%5F15%5F7.cim?ref=blog.tonalphoto.com) (736 MB)
- **Release notes:** [X2D\_II\_100C\_Release\_Notes\_EN\_20261118.pdf](https://cdn.hasselblad.com/firmware/X2D%5FII%5F100C%5FFirmware/1.4.15.7/X2D%5FII%5F100C%5FRelease%5FNotes%5FEN%5F20261118.pdf?ref=blog.tonalphoto.com)

I installed it this morning and shot test frames. If you want to tether into Capture One, this is the update you need. If you were waiting for it to fix the focus distance problems I wrote up in October, it doesn't fix them, and once it is on the camera there is no way back to 1.3.18.1.

💡

****A note on support:** This post represents my personal exploration and testing, not official technical support or guidance from Hasselblad. If you need assistance with your Hasselblad equipment, please contact Hasselblad directly: [customersupport@hasselblad.com](mailto:customersupport@hasselblad.com) for global support, [support.us@hasselblad.com](mailto:support.us@hasselblad.com) for the Americas, or visit hasselblad.com/support for regional options.

> **Key finding:** X2D II 100C firmware 1.4.15.7 (2026-11-18) adds wired tethering to Capture One 16.9.1\. In my test frames on the new firmware the camera still writes focus distance in feet into a field defined in meters, and still writes "infinity" for some close-focus frames. Downgrade is not supported.

## What does X2D II firmware 1.4.15.7 change?

Two things, according to Hasselblad. Verbatim from the release notes¹:

> **What's New**Added support for tethered shooting, parameter control, and live view in the Capture One app.Improved system stability.  
>  
> **Notes**Downgrade is not supported after the update."Update is completed!" will be shown on the touch display once the update is successful.

This is the first X2D II release note to name another company's app. The [previous release, 1.3.18.1](https://blog.tonalphoto.com/x2d-ii-firmware-1-3-18-1/), listed one change to the rear screen in low light, and the one before that said only "Improved system stability."

Researching and writing the blog and page posts I produce takes up a lot of my time and costs me money for software subscriptions, tooling, and other incidentals related to running a business.

Please consider a paid membership to help me keep the lights on and pay the bills - it is only a fraction of the cost of an X2D II and a lens. Click on the button to go to the membership page to see the options available.

[Support the blog. ](https://blog.tonalphoto.com/membership/) 

## What Capture One needs on its side

Capture One 16.9.1 for desktop and Capture One mobile 4.3, both released today. Capture One's release notes² put it this way:

> Tether your Hasselblad X2D II 100C straight into Capture One, on desktop or mobile. It's the first Hasselblad camera you can tether to Capture One. Tethering works over a wired connection.

Hasselblad's press release³ states the requirement from the camera side: "Wired tethering for the Hasselblad X2D II 100C is available today in Capture One 16.9.1 for desktop and Mobile 4.3.0, requiring X2D II 100C firmware version 1.4.15.7."

From the two companies' pages:

- **X2D II only.** Capture One's camera list⁴ now shows the X2D II 100C as tethered with Live View and no wireless. The X2D 100C and the CFV 100C still show "No" for all three. They keep the RAW file support they got in July and nothing more.
- **Cable only.** There is no wireless tethering. Phocus Mobile 2 is still the way to connect without a cable.
- **The two lists don't match.** Hasselblad's notes promise "tethered shooting, parameter control, and live view". Capture One's camera support line says "wired tethering, Live View". Which camera settings Capture One can change is something I'll report once I've tried it.
- **Existing sessions need upgrading.** Capture One's notes say sessions and catalogs created before 16.9.0 "must be upgraded to open in Capture One 16.9.1". Back them up before you update.

Neither company says which option to pick in the camera's USB Connected dialog, or whether the file that lands in Capture One is a 3FR or an FFF.

I haven't tethered yet. When I tried this morning I couldn't reach Capture One's site to download 16.9.1.

Color is unchanged by any of this. Capture One renders Hasselblad files with its own profiles, as it has since [July's 16.8.3 release](https://blog.tonalphoto.com/capture-one-hasselblad-raw-support/), and Phocus still tethers the way it always has.

Have you seen the guide? I've published Essential Phocus 4.x for Mac - 85 topics across 8 sections and 251 pages covering everything from HNCS color science to HDR workflows. It's the reference manual Hasselblad hasn't updated since 3.8\. It's $49, and updates are included.

[Get it here ](https://payhip.com/b/6pqAt?ref=blog.tonalphoto.com) 

## The focus distance bugs are not fixed

In October I wrote about [three problems with the focus distance the X2D II records](https://blog.tonalphoto.com/x2d-ii-firmware-focus-distance-feet-lightroom/) in each raw file. The camera writes it into a standard EXIF field called SubjectDistance, which is defined in meters, and both Lightroom Classic and Capture One use that field for their lens corrections. On firmware 1.3.18.1:

1. With the camera's distance unit set to feet, it wrote the feet value into the meters field.
2. Some close-focus frames were written as "infinity".
3. Sometimes the value stayed the same from frame to frame while the focus changed.

Hasselblad's support team confirmed all three to me in early November and said a fix would come in a future firmware update, without naming a version. The 1.4.15.7 release notes don't mention them.

So I shot 17 frames on 1.4.15.7 this morning with the XCD 25V, 55V and 90V and read the field in each one.

**Feet are still written into the meters field.** Two frames on the 55V, manual focus, focus not touched between them, only the unit setting switched. The focus data the camera stores elsewhere in the file is identical in the two frames.

| Unit setting | SubjectDistance in the file |
| ------------ | --------------------------- |
| Meters       | 1.59                        |
| Feet         | 5.20                        |

1.59 meters is 5.22 feet. Lightroom Classic and Capture One read both numbers as meters, so a camera set to feet still tells them the subject is 3.3 times further away than it was.

**"Infinity" still turns up at close focus.** The first ten test frames I shot this morning all carried the infinity value. They were focused between about 0.3 and 1.6 meters, on all three lenses, and I pulled the battery partway through. The next seven frames all carried a real distance, across three separate power-on sessions, in autofocus and manual focus. I can't make it happen on demand, which is how it behaved on 1.3.18.1 as well.

**The stuck value I didn't see.** In the last seven frames the number changed every time I refocused. Seven frames is not enough to call it fixed.

Seventeen frames can't show whether 1.4.15.7 is worse than 1.3.18.1 for focus distance. They do show that the feet problem and the infinity problem are both still there.

If your camera is set to feet and you use Lightroom Classic or Capture One, the advice from October stands: set the camera to meters under Main Menu, General, Language & Unit, Unit of Distance, Metre. For files already shot, my correction script is now public: [hasselblad-focus-retrofit on GitHub](https://github.com/kmichels/hasselblad-focus-retrofit?ref=blog.tonalphoto.com). It reads the focus data the camera stores in its own maker note, the same data Phocus works from, and rewrites the EXIF distance to match. I ran it on today's frames and it corrected the two feet frames and the ten infinity frames. For now it covers five XCD lenses out to about 2 to 4 meters, and the README lists what it doesn't handle yet.

I haven't checked what a tethered capture records, and can't until I've tethered.

## Should you install 1.4.15.7?

If you want to tether into Capture One, yes. This firmware is the requirement.

If you don't, there is no hurry. The only other line in the notes is "Improved system stability", the update can't be reversed, and the focus distance problems are the same as before. Waiting costs you nothing, and you can install it the day you need it.

## I can no longer look inside the firmware

The download is 736 MB. The six earlier X2D II releases I've kept are all between 363 and 383 MB.

The firmware inside this download is encrypted in a way the earlier releases weren't. I've looked inside every earlier update before writing about it, and this one I can't open. So the release notes are the only description of what changed, and I can't tell you what "Improved system stability" covers.

Every earlier release, and what each one changed, is in the [firmware history post](https://blog.tonalphoto.com/x2d-ii-firmware-updates/).

## How to install it

The card method is the reliable one:

1. Charge the battery fully.
2. Format a CFexpress card in the camera (Main Menu → Storage → Format CFexpress).
3. Copy the `.cim` to the root of the card, not inside a folder.
4. Insert the card, then go to Main Menu → General → Service → Check for Update.
5. Don't power off or remove the card until "Update is completed!" appears on the touch display.

Afterwards, check Main Menu → General → Service. It should read 1.4.15.7, and the raw files from my camera now report that version too.

If you want the next release in your inbox the morning it appears, the signup is on the [firmware tracker page](https://blog.tonalphoto.com/hasselblad-firmware-tracker/).

## Sign up for The Tech Behind the Frame - Hasselblad edition

Practical Hasselblad knowledge the official docs don't cover. Workflows, file behaviour, and real-world insights for Phocus and X2D II users.

Subscribe 

Email sent! Check your inbox to complete your signup. 

No spam. Unsubscribe anytime.

## References

1. [X2D II 100C Firmware 1.4.15.7 Release Notes (PDF), Hasselblad CDN](https://cdn.hasselblad.com/firmware/X2D%5FII%5F100C%5FFirmware/1.4.15.7/X2D%5FII%5F100C%5FRelease%5FNotes%5FEN%5F20261118.pdf?ref=blog.tonalphoto.com). The PDF includes the notes for every earlier release.
2. [Capture One 16.9.1 release notes, Capture One Support (November 18, 2026)](https://support.captureone.com/hc/en-us/articles/40617282859677-Capture-One-16-9-1-release-notes?ref=blog.tonalphoto.com)
3. [Hasselblad and Capture One Take the Next Step with Tethering Available Now, Hasselblad press release (November 18, 2026)](https://www.hasselblad.com/press/press-releases/2026/hasselblad-and-capture-one-take-the-next-step-with-tethering-available-now?ref=blog.tonalphoto.com)
4. [Supported Camera Models and RAW Files by Capture One, Capture One Support](https://support.captureone.com/hc/en-us/articles/360002718118-Supported-Camera-Models-and-RAW-Files-by-Capture-One?ref=blog.tonalphoto.com) (read November 18, 2026)